Ford Racing 5.0L Coyote Long Block Gen 1 (M-6006-M50A1)

Ford Performance 5.0L Coyote Long Block Gen 1

(No reviews yet) Write a Review
In Stock - Get it in 3-5 days (US Only, No APO) - Truck Freight
$80.00 (Fixed Shipping Cost)

The M-6006-M50A1 Long Block has been developed for the customer that needs a Coyote that will run in a "Gen 1", 2011-2014 Mustang or run with a "Gen 1" engine control system. Ford Performance offers this long block as an alternative for those that don't need a fully dressed engine. You still get the same great Coyote performance in a package that lets you build it your way. The Twin Independent Variable Camshaft Timing (Ti-VCT) Coyote engine delivers 435 horsepower at 6,500 RPM and 400 ft.-lb at 4,250 RPM using premium fuel. Ford Performance starts off with an aluminum block utilizing cross-bolted main bearing caps and thick main bearing bulk heads for low end strength. High RPM performance is improved with an optimized oil drainback and windage control. This motor is preassembled and comes in with an 11.0:1 compression ratio.

- Larger intake valves than "Gen 1" 
- Larger exhaust valves than "Gen 1"
- Revised intake camshafts from "Gen 1"
- Revised exhaust camshafts from "Gen 1"
- Stiffer valve springs to ensure that the valves close completely at high rpm
- Redesigned piston tops with deeper cutouts to clear the new larger valves
- Rebalanced forged crankshaft that supports higher-rpm operation    
- 11.0:1 Compression ratio 
- Hypereutectic aluminum pistons
- Forged connecting rods 
- Forged steel crankshaft
- Aluminum block 
- 8 qt. capacity oil pan 
- Aluminum cylinder heads, DOHC, four valves per cylinder, Variable intake and exhaust camshaft timing
- Engine mount bosses and bell housing mount pattern common to 4.6L modular engines  
- New cylinder-head casting, including revised ports that provide a straighter path to the valves for less-restrictive intake and exhaust flow and combustion chamber modifications to accommodate larger valves

Note: Designed for use with 2011-2014 style engine controls only!

Whats Not Included:
- Vehicle harness and PCM not included
- Does not include alternator, for alternator kit see M-8600-M50BALT.
- Intake manifold
- Throttle body
- Fuel rails and fuel injectors
- Engine wiring harness
- Water pump pulley
- Ignition coils
- Exhaust manifolds

1987, 1988, 1989, 1990, 1991, 1992, 1993 Fox Body Mustang
1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986 Fox Body Mustang

Write a Review
This product hasn't received any reviews yet. Be the first to review this product!

Related Products

Customers Also Viewed